wiring for tele 3 way switch - Wiring Technology

Wiring for a Tele 3-Way Switch

If you have a Telecaster guitar and are looking to upgrade your instrument's tone, then installing a Tele 3-way switch is the perfect way to get started. With this switch, you'll be able to access three distinct pickup combinations, each with its own unique tone. Installing this switch requires a bit of wiring, but if you follow the instructions carefully, you can get the job done quickly and easily.

First, begin by disconnecting the ground wire from the volume pot. This will prevent any electric shock hazard while you work. Once the ground wire has been safely detached, remove the two screws that hold the switch in place. Then, unscrew the four screws on the back of the switch, and remove it. Now, you can begin connecting the wires.

The first wire should run from the volume pot to the center lug on the switch. This will provide a connection between the volume control and the switch. Next, connect a wire from the output jack to the top left lug on the switch. Then, connect a wire from the pickup selector switch to the top right lug. Lastly, connect a wire from the pickup selector switch to the bottom lug.

Once all of your wiring is complete, you can test it out. Start by flipping the switch to the middle position. When you do this, you should hear a sound coming out of the pickups. If you don't hear any sound, check the wiring connections to make sure that everything is properly connected.

With your Tele 3-way switch now installed, you can enjoy the full range of tone options available to you. Whether you're playing jazz, blues, or rock, you'll be able to dial in the perfect sound for each genre. Take some time to experiment with different configurations, and you'll soon be making beautiful music with your guitar.

Mod Garage How To Wire A Stock Tele Pickup Switch Premier Guitar